Différences

Ci-dessous, les différences entre deux révisions de la page.

--- tech:pb_memoire_cpu_hardware_mcelog [2025/03/24 15:06] – créée - modification externe 127.0.0.1
+++ tech:pb_memoire_cpu_hardware_mcelog [2026/06/07 19:12] (Version actuelle) – modification externe 127.0.0.1
@@ Ligne 1: / Ligne 1: @@
+<!DOCTYPE markdown>
+{{tag>Brouillon Matériel CPU Mémoire Arch}}
+# Pb memoire cpu hardware mcelog
+** Le paquet mcelog n'est plus pris en charge dans les noyaux 4.12 et suivants. rasdaemon peut être utilisé comme remplacement **
+rasdaemon
+~~~
+utility to receive RAS error tracings
+ rasdaemon is a RAS (Reliability, Availability and Serviceability) logging
+ tool.  It currently records memory errors, using the EDAC tracing events.
+ EDAC are drivers in the Linux kernel that handle detection of ECC errors
+ from memory controllers for most chipsets on x86 and ARM architectures.
+ This userspace component consists of an init script which makes sure EDAC
+ drivers and DIMM labels are loaded at system startup, as well as a utility
+ for reporting current error counts from the EDAC sysfs files
+~~~
+## I enable memory error reporting
+http://www.mcelog.org/faq.html
+~~~bash
+chkconfig mcelog on
+rcmcelog start
+~~~
+`/etc/cron.hourly/mcelog.cron`
+~~~bash
+#!/bin/bash
+# is mcelog supported?
+/usr/sbin/mcelog --supported >& /dev/null
+if [ $? -eq 1 ]; then
+       exit 1;
+fi
+/usr/sbin/mcelog --ignorenodev --filter >> /var/log/mcelog
+~~~
+http://askubuntu.com/questions/605369/mce-hardware-error-machine-check-events-logged-appears-in-syslog-what-sho
+~~~bash
+sudo apt-get install mcelog
+~~~
+The events will be logged to /var/log/mcelog. You can also run:
+~~~bash
+sudo mcelog --client
+~~~
+## II
+~~~
+# mcelog
+mcelog: AMD Processor family 18: Please use the edac_mce_amd module instead.
+: Success
+CPU is unsupported
+~~~
+~~~bash
+lsmod | grep edac_mce_amd
+modprobe edac_mce_amd
+echo edac_mce_amd >> /etc/modules
+~~~
+## III
+http://www.advancedclustering.com/act-kb/what-are-machine-check-exceptions-or-mce/
+Paste or type the error message into a file, and then run it through the mcelog for example:
+~~~bash
+/usr/sbin/mcelog --k8 --ascii < myerror
+~~~
+Use the –k8 option if you are using an AMD Opteron or Athlon 64 processor, or substitute it for –p4 for a Pentium 4 or Xeon. Here is the output from the previous MCE error:
+~~~
+HARDWARE ERROR. This is *NOT* a software problem!
+Please contact your hardware vendor
+CPU 1 4 northbridge TSC b0ce27165dd3
+ Northbridge Chipkill ECC error
+ Chipkill ECC syndrome = 3700
+ bit32 = err cpu0
+ bit45 = uncorrected ecc error
+ bit57 = processor context corrupt
+ bit61 = error uncorrected
+ bit62 = error overflow (multiple errors)
+ bus error 'local node origin, request didn't time out
+ generic read mem transaction
+ memory access, level generic'
+STATUS f600200137080813 MCGSTATUS 4
+~~~
+This indicates that an uncorrected ECC error occurred. This indicates that one of your memory modules has failed. For further analysis please submit a support ticket with the complete MCE error message and the output of mcelog.